Use board clamps to keep critical boards flat during printing. Quick Fit Board Clamps from DEK are designed for fast changeovers and easy maintenance.

For optimal print results and operational efficiency, board clamps must be in correct adjustment; DEK Quick Fit Board Clamps are easily set-up, with minimal time overhead, by simply replacing the foils and shims as they become worn.

Older DEK printing machines can be upgraded to accept DEK Quick Fit Board Clamps (one day installation, on-site). Other upgrades may be required for specific machine configurations. All Europa, Horizon or Galaxy printers are fitted with Quick Fit Board Clamps.

• Clamp secured by just two flat head screws
• Available in 250/500mm (standard rail) or 380mm (RTC) lengths to suite product
• 100µm clamping foil to maximise printable area
• Interchangeable with foil-less board clamps

• Secure and safe fixture of the board during alignment and printing is assured.
• Clamping will help to get a repeatable result in paste deposition.
• Can help to flatten warped boards which can be caused by the reflow process or bad board quality.
• Quick change clamps make the changeover to custom clamping very simple
• Tooled to position - no need for intensive rail parallelism calibration
• Less material cost, only foils/ shims require replacement when worn

137516	520mm Quick Fit Foils & Shims
135208	380mm Quick Fit Foils & Shims
119203	500mm Standard Board Clamp
178031	250mm Quick Fit Foils & Shims (ASM)
177061	340mm Quick Fit Foils & Shims (ASM)
136106	288 Quick Fit Replacement Foil
600638	Quick Fit Board Clamps Upgrade for 265 GSX/LT/GS Machines