DEK International - Stencils\Vector Frame - Vector Frame Systems

Vector Frame System

Loading Procedure


1) Slide mask out of cassette onto loading jig	2) Check location of mask against bolt heads	3) Pick-up frame	4) Press foot valve and hold down

5) Offer frame onto jig and jiggle to engage teeth	6) Press frame sides down firmly to depress loading mat which compensates for eneven loading surfaces	7) Ensure there is no gap between mask and frame	8) Release foot valve

9) Lift frame and mask clear of loading jig

	Unloading Procedure


1) Offer frame and mask onto jig	2) Press foot valve	3) Lift frame and slowly jiggle to release mask	4) Release foot valve

5) Slide cassette flap under corner of mask	6) Carefully slide cassette over mask until two thirds is covered	7) Lift cassette upright	8) Let mask slide to bottom of cassette

9) Close lid for storage